И
Иван
Офлајн
во Пазар3 од 2024
Објавени:
дек. 15 2017
09:30
Ecler MPA4-80R power amplifier
ЕУР
Објавени:
дек. 15
09:30
Прегледи:
34
Користен но функционален и исправен засиливач (amplifier). Одличен за клуб, бар, ресторан, продавница, евенти .. Спецификација:
In 1998, ECLER presented its first multi-channel amplifier, the MPA280. Today, ECLER offers the most user-friendly and versatile range of multi-channel amplifiers. The MPA-R devices are the best choice for the professional audio installer who needs unproblematic and reliable multichannel amplifiers.
The MPA-R range includes five 4 and 6 channel models with outputs between 80W RMS / 4 ohms and 410W RMS / 4 ohms, with tested and tested reliability and high flexibility thanks to the ability to connect the input channels and bridge the output channels.
- 2 19 '' HE
- Extended linear power supply
- ECLER SPM technology patent pending (MPA4-150R, MPA6-150R, MPA4-400R)
- Individual controls for input sensitivity with the possibility of sealing in order to avoid unwanted manipulation.
- Signal presence (SP) and CLIP indicators for each channel.
- Balanced inputs via XLR jacks
- Independent VCA remote controls for each input channel on all models above 0-10V voltage or volume remote control for wall mounting.
- EUROBLOCK Charge and Sockets for VCA remote control
- Silent convection cooling (MPA4-80R and MPA6-80R)
- Low noise active ventilation (MPA4-150R, MPA6-150R and MPA4-400R). Fan system with dual slope control.
- Fully protected against short circuits, DC at the outputs and overheating
- Stack outputs on all models
- Connection switch for input channels for a maximum of versatility
- Integrated internal Butterworth high pass and low pass third order crossover (MPA4-150R, MPA6-150R, MPA4-400R) for separate path amplification
General applications for MPA-R:
- A reliable multi-channel solution for any application requiring the distribution of the audio signal into separate zones.
.....Технички карактеристики:
- 4-channel, 4x78 watts
- POWER 20-20kHz 1% THD
- 1 channel @ 4Ω 80 WRMS
- 1 channel @ 8Ω 50 WRMS
- All Channels @ 4Ω 55 WRMS
- All Channels @ 8Ω 40 WRMS
- 1 Bridged channel @ 8Ω (all channels driven) 117 WRMS
- Frequency response (-1dB) 20Hz - 30kHz
* THD + Noise @ 1kHz Full Pwr. <0.02%
* Intermodulation distortion 50Hz & 7kHz, 4: 1 <0.02%
* TIM 100 <0.05%
* S + N / N 20Hz -20kHz @ 1W / 4Ω> 90dB
- Damping factor 1kHz @ 8Ω> 160
- Slew rate ± 10V / μs
* Channel crosstalk @ 1kHz> 60dB
- Input Sensitivity / Impedance 0dBV /> 20kΩ
- Power consumption (max out) 524VA
* VCA OFF
- Dimensions: 482.6x88x391mm / 9,5kg
In 1998, ECLER presented its first multi-channel amplifier, the MPA280. Today, ECLER offers the most user-friendly and versatile range of multi-channel amplifiers. The MPA-R devices are the best choice for the professional audio installer who needs unproblematic and reliable multichannel amplifiers.
The MPA-R range includes five 4 and 6 channel models with outputs between 80W RMS / 4 ohms and 410W RMS / 4 ohms, with tested and tested reliability and high flexibility thanks to the ability to connect the input channels and bridge the output channels.
- 2 19 '' HE
- Extended linear power supply
- ECLER SPM technology patent pending (MPA4-150R, MPA6-150R, MPA4-400R)
- Individual controls for input sensitivity with the possibility of sealing in order to avoid unwanted manipulation.
- Signal presence (SP) and CLIP indicators for each channel.
- Balanced inputs via XLR jacks
- Independent VCA remote controls for each input channel on all models above 0-10V voltage or volume remote control for wall mounting.
- EUROBLOCK Charge and Sockets for VCA remote control
- Silent convection cooling (MPA4-80R and MPA6-80R)
- Low noise active ventilation (MPA4-150R, MPA6-150R and MPA4-400R). Fan system with dual slope control.
- Fully protected against short circuits, DC at the outputs and overheating
- Stack outputs on all models
- Connection switch for input channels for a maximum of versatility
- Integrated internal Butterworth high pass and low pass third order crossover (MPA4-150R, MPA6-150R, MPA4-400R) for separate path amplification
General applications for MPA-R:
- A reliable multi-channel solution for any application requiring the distribution of the audio signal into separate zones.
.....Технички карактеристики:
- 4-channel, 4x78 watts
- POWER 20-20kHz 1% THD
- 1 channel @ 4Ω 80 WRMS
- 1 channel @ 8Ω 50 WRMS
- All Channels @ 4Ω 55 WRMS
- All Channels @ 8Ω 40 WRMS
- 1 Bridged channel @ 8Ω (all channels driven) 117 WRMS
- Frequency response (-1dB) 20Hz - 30kHz
* THD + Noise @ 1kHz Full Pwr. <0.02%
* Intermodulation distortion 50Hz & 7kHz, 4: 1 <0.02%
* TIM 100 <0.05%
* S + N / N 20Hz -20kHz @ 1W / 4Ω> 90dB
- Damping factor 1kHz @ 8Ω> 160
- Slew rate ± 10V / μs
* Channel crosstalk @ 1kHz> 60dB
- Input Sensitivity / Impedance 0dBV /> 20kΩ
- Power consumption (max out) 524VA
* VCA OFF
- Dimensions: 482.6x88x391mm / 9,5kg
Безбедна достава со ЕЛС
Плаќање после проверка на нарачката
Достава до врата
Купи сега
Достава со “Ecologistic”: од МКД
Продавач
Купи сега
Достава со “Ecologistic”: од 120 МКД
Безбедна достава со ЕЛС
Плаќање после проверка на нарачката
Достава до врата